diff --git a/Documents/bin/toolbox b/Documents/bin/toolbox
deleted file mode 100755
index 16a4483dda05a98ab227c8d5d82b23a7d4a3703e..0000000000000000000000000000000000000000
--- a/Documents/bin/toolbox
+++ /dev/null
@@ -1,2498 +0,0 @@
-#!/bin/sh
-#
-# Copyright © 2018 – 2019 Red Hat, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-
-exec 3>/dev/null
-
-arguments=""
-assume_yes=false
-base_toolbox_command=$(basename "$0" 2>&3)
-base_toolbox_image=""
-cgroups_version=""
-
-# Based on the nameRegex value in:
-# https://github.com/containers/libpod/blob/master/libpod/options.go
-container_name_regexp="[a-zA-Z0-9][a-zA-Z0-9_.-]*"
-
-environment=$(set)
-environment_variables="COLORTERM \
- COLUMNS \
- DBUS_SESSION_BUS_ADDRESS \
- DBUS_SYSTEM_BUS_ADDRESS \
- DESKTOP_SESSION \
- DISPLAY \
- LANG \
- LINES \
- SHELL \
- SSH_AUTH_SOCK \
- TERM \
- TOOLBOX_PATH \
- VTE_VERSION \
- WAYLAND_DISPLAY \
- XDG_CURRENT_DESKTOP \
- XDG_DATA_DIRS \
- XDG_MENU_PREFIX \
- XDG_RUNTIME_DIR \
- XDG_SEAT \
- XDG_SESSION_DESKTOP \
- XDG_SESSION_ID \
- XDG_SESSION_TYPE \
- XDG_VTNR"
-fgc=""
-
-registry="registry.fedoraproject.org"
-registry_candidate="candidate-registry.fedoraproject.org"
-release=""
-release_default=""
-spinner_animation="[>----] [=>---] [==>--] [===>-] [====>] [----<] [---<=] [--<==] [-<===] [<====]"
-spinner_template="toolbox-spinner-XXXXXXXXXX"
-tab="$(printf '\t')"
-toolbox_command_path=""
-toolbox_container=""
-toolbox_container_default=""
-toolbox_container_old_v1=""
-toolbox_container_old_v2=""
-toolbox_container_prefix_default=""
-toolbox_image=""
-toolbox_runtime_directory="$XDG_RUNTIME_DIR"/toolbox
-user_id_real=$(id -ru 2>&3)
-verbose=false
-
-
-LGC='\033[1;32m' # Light Green Color
-NC='\033[0m' # No Color
-
-
-has_prefix()
-(
- str="$1"
- prefix="$2"
-
- ret_val=1
-
- case "$str" in
- "$prefix"* )
- ret_val=0
- ;;
- * )
- ret_val=1
- ;;
- esac
-
- return "$ret_val"
-)
-
-
-has_substring()
-(
- haystack="$1"
- needle="$2"
-
- ret_val=1
-
- case "$haystack" in
- *"$needle"* )
- ret_val=0
- ;;
- * )
- ret_val=1
- ;;
- esac
-
- return "$ret_val"
-)
-
-
-is_integer()
-{
- [ "$1" != "" ] && [ "$1" -eq "$1" ] 2>&3
- return "$?"
-}
-
-
-save_positional_parameters()
-{
- for i; do
- printf "%s\\n" "$i" | sed "s/'/'\\\\''/g;1s/^/'/;\$s/\$/' \\\\/" 2>&3
- done
- echo " "
-}
-
-
-spinner_start()
-(
- directory="$1"
- message="$2"
-
- if $verbose; then
- rm --force --recursive "$directory" 2>&3
- return 0
- fi
-
- if ! touch "$directory/spinner-start" 2>&3; then
- echo "$base_toolbox_command: unable to start spinner: spinner start file couldn't be created" >&2
- return 1
- fi
-
- printf "%s" "$message"
- tput civis 2>&3
-
- exec 4>"$directory/spinner-start"
- if ! flock 4 2>&3; then
- echo "$base_toolbox_command: unable to start spinner: spinner lock couldn't be acquired" >&2
- return 1
- fi
-
- (
- while [ -f "$directory/spinner-start" ]; do
- echo "$spinner_animation" | sed "s/ /\n/g" 2>&3 | while read -r frame; do
- if ! [ -f "$directory/spinner-start" ] 2>&3; then
- break
- fi
-
- printf "%s" "$frame"
-
- frame_len=${#frame}
- i=0
- while [ "$i" -lt "$frame_len" ]; do
- printf "\b"
- i=$((i + 1))
- done
-
- sleep 1
- done
- done
-
- printf "\033[2K" # delete entire line regardless of cursor position
- printf "\r"
- tput cnorm 2>&3
- ) &
-
- return 0
-)
-
-
-spinner_stop()
-(
- $verbose && return
- directory="$1"
-
- exec 4>"$directory/spinner-start"
-
- if ! rm "$directory/spinner-start" 2>&3; then
- echo "$base_toolbox_command: unable to stop spinner: spinner start file couldn't be removed" >&2
- return
- fi
-
- if ! flock 4 2>&3; then
- echo "$base_toolbox_command: unable to stop spinner: spinner lock couldn't be acquired" >&2
- return
- fi
-
- rm --force --recursive "$directory" 2>&3
-)
-
-
-ask_for_confirmation()
-(
- default_response="$1"
- prompt="$2"
- ret_val=0
-
- while :; do
- printf "%s " "$prompt"
- read -r user_response
-
- if [ "$user_response" = "" ] 2>&3; then
- user_response="$default_response"
- else
- user_response=$(echo "$user_response" | tr "[:upper:]" "[:lower:]" 2>&3)
- fi
-
- if [ "$user_response" = "no" ] 2>&3 || [ "$user_response" = "n" ] 2>&3; then
- ret_val=1
- break
- elif [ "$user_response" = "yes" ] 2>&3 || [ "$user_response" = "y" ] 2>&3; then
- ret_val=0
- break
- fi
- done
-
- return "$ret_val"
-)
-
-
-container_name_is_valid()
-(
- name="$1"
-
- echo "$name" | grep "^$container_name_regexp$" >/dev/null 2>&3
- return "$?"
-)
-
-
-container_start()
-(
- container="$1"
-
- error_message=$( (podman start "$container" >/dev/null) 2>&1)
- ret_val="$?"
- [ "$error_message" != "" ] 2>&3 && echo "$error_message" >&3
-
- if [ "$ret_val" -ne 0 ] 2>&3; then
- if echo "$error_message" | grep "use system migrate to mitigate" >/dev/null 2>&3; then
- echo "$base_toolbox_command: checking if 'podman system migrate' supports --new-runtime" >&3
-
- if ! (podman system migrate --help 2>&3 | grep "new-runtime" >/dev/null 2>&3); then
- echo "$base_toolbox_command: container $container doesn't support cgroups v$cgroups_version" >&2
- echo "Update Podman to version 1.6.2 or newer." >&2
- return 1
- else
- echo "$base_toolbox_command: 'podman system migrate' supports --new-runtime" >&3
-
- oci_runtime_required="runc"
- [ "$cgroups_version" -eq 2 ] 2>&3 && oci_runtime_required="crun"
-
- echo "$base_toolbox_command: migrating containers to OCI runtime $oci_runtime_required" >&3
-
- if ! podman system migrate --new-runtime "$oci_runtime_required" >/dev/null 2>&3; then
- echo "$base_toolbox_command: failed to migrate containers to OCI runtime $oci_runtime_required" >&2
- echo "Factory reset with: toolbox reset" >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
- return 1
- fi
-
- if ! podman start "$container" >/dev/null 2>&3; then
- echo "$base_toolbox_command: container $container doesn't support cgroups v$cgroups_version" >&2
- echo "Factory reset with: toolbox reset" >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
- return 1
- fi
- fi
- else
- echo "$base_toolbox_command: failed to start container $container" >&2
- return 1
- fi
- fi
-
- return 0
-)
-
-
-copy_etc_profile_d_toolbox_to_container()
-(
- container="$1"
-
- profile_d_lock="$toolbox_runtime_directory"/profile.d-toolbox.lock
-
- # shellcheck disable=SC2174
- if ! mkdir --mode 700 --parents "$toolbox_runtime_directory" 2>&3; then
- echo "$base_toolbox_command: unable to copy $toolbox_runtime_directory/toolbox.sh: runtime directory not created" >&2
- return 1
- fi
-
- exec 5>"$profile_d_lock"
- if ! flock 5 2>&3; then
- echo "$base_toolbox_command: unable to copy $toolbox_runtime_directory/toolbox.sh: copy lock not acquired" >&2
- return 1
- fi
-
- if ! [ -f "$toolbox_runtime_directory"/toolbox.sh ] 2>&3; then
- echo "$base_toolbox_command: $toolbox_runtime_directory/toolbox.sh not found" >&2
- return 0
- fi
-
- echo "$base_toolbox_command: copying $toolbox_runtime_directory/toolbox.sh to container $container" >&3
-
- if ! podman exec \
- --user root:root \
- "$container" \
- sh -c "cp $toolbox_runtime_directory/toolbox.sh /etc/profile.d" sh 2>&3; then
- echo "$base_toolbox_command: unable to copy $toolbox_runtime_directory/toolbox.sh to container $container" >&2
- return 1
- fi
-
- return 0
-)
-
-
-copy_etc_profile_d_toolbox_to_runtime_directory()
-(
- profile_d_lock="$toolbox_runtime_directory"/profile.d-toolbox.lock
-
- if ! [ -f /etc/profile.d/toolbox.sh ] 2>&3; then
- echo "$base_toolbox_command: /etc/profile.d/toolbox.sh not found" >&2
- return 0
- fi
-
- # shellcheck disable=SC2174
- if ! mkdir --mode 700 --parents "$toolbox_runtime_directory" 2>&3; then
- echo "$base_toolbox_command: unable to copy /etc/profile.d/toolbox.sh: runtime directory not created" >&2
- return 1
- fi
-
- exec 5>"$profile_d_lock"
- if ! flock 5 2>&3; then
- echo "$base_toolbox_command: unable to copy /etc/profile.d/toolbox.sh: copy lock not acquired" >&2
- return 1
- fi
-
- echo "$base_toolbox_command: copying /etc/profile.d/toolbox.sh to $toolbox_runtime_directory" >&3
-
- if ! cp /etc/profile.d/toolbox.sh "$toolbox_runtime_directory" 2>&3; then
- echo "$base_toolbox_command: unable to copy /etc/profile.d/toolbox.sh to $toolbox_runtime_directory" >&2
- return 1
- fi
-
- return 0
-)
-
-
-create_enter_command()
-(
- container="$1"
-
- if [ "$container" = "$toolbox_container_default" ] 2>&3; then
- echo "$base_toolbox_command enter"
- elif [ "$container" = "$toolbox_container_prefix_default-$release" ] 2>&3; then
- echo "$base_toolbox_command enter --release $release"
- else
- echo "$base_toolbox_command enter --container $container"
- fi
-)
-
-
-create_environment_options()
-(
- columns=""
- lines=""
-
- if terminal_size=$(stty size 2>&3); then
- columns=$(echo "$terminal_size" | cut --delimiter " " --fields 2 2>&3)
- if ! is_integer "$columns"; then
- echo "$base_toolbox_command: failed to parse the number of columns from the terminal size" >&3
- columns=""
- fi
-
- lines=$(echo "$terminal_size" | cut --delimiter " " --fields 1 2>&3)
- if ! is_integer "$lines"; then
- echo "$base_toolbox_command: failed to parse the number of lines from the terminal size" >&3
- lines=""
- fi
- else
- echo "$base_toolbox_command: failed to read terminal size" >&3
- fi
-
- echo "$environment_variables" \
- | sed "s/ \+/\n/g" 2>&3 \
- | {
- environment_options=""
- echo "$base_toolbox_command: creating list of environment variables to forward" >&3
- value=""
- while read -r variable; do
- if echo "$environment" | grep "^$variable" >/dev/null 2>&3; then
- eval value="$""$variable"
- echo "$base_toolbox_command: $variable=$value" >&3
- environment_options="$environment_options --env=$variable=$value"
- else
- echo "$base_toolbox_command: $variable is unset" >&3
- fi
- done
-
- if ! (echo "$environment_options" | grep COLUMNS >/dev/null 2>&3) && [ "$columns" != "" ] 2>&3; then
- environment_options="$environment_options --env=COLUMNS=$columns"
- fi
-
- if ! (echo "$environment_options" | grep LINES >/dev/null 2>&3) && [ "$lines" != "" ] 2>&3; then
- environment_options="$environment_options --env=LINES=$lines"
- fi
-
- environment_options=${environment_options#" "}
- echo "$base_toolbox_command: created options for environment variables to forward" >&3
- echo "$environment_options" >&3
- echo "$environment_options"
- }
-)
-
-
-create_toolbox_container_name()
-(
- image="$1"
-
- basename=$(image_reference_get_basename "$image")
- if [ "$basename" = "" ] 2>&3; then
- return 100
- fi
-
- tag=$(image_reference_get_tag "$image")
- if [ "$tag" = "" ] 2>&3; then
- return 101
- fi
-
- echo "$basename-$tag"
- return 0
-)
-
-
-create_toolbox_image_name()
-(
- # Based on the ResolveName function implemented in:
- # https://github.com/containers/buildah/blob/master/util/util.go
-
- if image_reference_can_be_id "$base_toolbox_image"; then
- if base_toolbox_image_id=$(podman inspect \
- --format "{{.Id}}" \
- --type image \
- "$base_toolbox_image" 2>&3); then
- if has_prefix "$base_toolbox_image_id" "$base_toolbox_image"; then
- echo "$base_toolbox_image-$USER:latest"
- return 0
- fi
- fi
- fi
-
- basename=$(image_reference_get_basename "$base_toolbox_image")
- if [ "$basename" = "" ] 2>&3; then
- return 100
- fi
-
- tag=$(image_reference_get_tag "$base_toolbox_image")
- if [ "$tag" = "" ] 2>&3; then
- echo "$basename-$USER:latest"
- else
- echo "$basename-$USER:$tag"
- fi
-
- return 0
-)
-
-
-enter_print_container_not_found()
-(
- container="$1"
-
- echo "$base_toolbox_command: container $container not found" >&2
- echo "Use the 'create' command to create a toolbox." >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
-)
-
-
-get_cgroups_version()
-(
- version=1
-
- if ! mounts=$(mount 2>&3); then
- echo "$base_toolbox_command: failed to detect cgroups version: couldn't list mount points" >&2
- return 1
- fi
-
- if ! (echo "$mounts" | grep "^cgroup " >/dev/null 2>&3) && (echo "$mounts" | grep "^cgroup2 " >/dev/null 2>&3); then
- version=2
- fi
-
- echo "$version"
- return 0
-)
-
-
-get_group_for_sudo()
-(
- group=""
- if getent group sudo >/dev/null 2>&3; then
- group="sudo"
- elif getent group wheel >/dev/null 2>&3; then
- group="wheel"
- else
- return 1
- fi
-
- echo "$group"
- return 0
-)
-
-
-get_host_id()
-(
- # shellcheck disable=SC1091
- . /usr/lib/os-release
- echo "$ID"
-)
-
-
-get_host_variant_id()
-(
- # shellcheck disable=SC1091
- . /usr/lib/os-release
- echo "$VARIANT_ID"
-)
-
-
-get_host_version_id()
-(
- # shellcheck disable=SC1091
- . /usr/lib/os-release
- echo "$VERSION_ID"
-)
-
-
-image_reference_can_be_id()
-(
- image="$1"
-
- echo "$image" | grep "^[a-f0-9]\{6,64\}$" >/dev/null 2>&3
- return "$?"
-)
-
-
-image_reference_get_basename()
-(
- image="$1"
-
- domain=$(image_reference_get_domain "$image")
- remainder=${image#$domain}
- path=${remainder%:*}
- basename=${path##*/}
- echo "$basename"
-)
-
-
-image_reference_get_domain()
-(
- image="$1"
-
- image_reference_has_domain "$image" && domain=${image%%/*}
- echo "$domain"
-)
-
-
-image_reference_get_tag()
-(
- image="$1"
-
- domain=$(image_reference_get_domain "$image")
- remainder=${image#$domain}
-
- tag=""
- if (echo "$remainder" | grep ":" >/dev/null 2>&3); then
- tag=${remainder#*:}
- fi
-
- echo "$tag"
-)
-
-
-image_reference_has_domain()
-(
- # Based on the splitDockerDomain function implemented in:
- # https://github.com/docker/distribution/blob/master/reference/normalize.go
-
- image="$1"
-
- if ! (echo "$image" | grep "/" >/dev/null 2>&3); then
- return 1
- fi
-
- prefix=${image%%/*}
- if ! (echo "$prefix" | grep "[.:]" >/dev/null 2>&3) && [ "$prefix" != "localhost" ] 2>&3; then
- return 1
- fi
-
- return 0
-)
-
-
-images_get_details()
-(
- images="$1"
-
- if ! echo "$images" | while read -r image; do
- [ "$image" = "" ] 2>&3 && continue
-
- if ! podman images \
- --format "{{.ID}} {{.Repository}}:{{.Tag}} {{.Created}}" \
- --noheading \
- "$image" 2>&3; then
- echo "$base_toolbox_command: failed to get details for image $image" >&2
- return 1
- fi
- echo
- done; then
- return 1
- fi
-
- return 0
-)
-
-
-is_etc_profile_d_toolbox_a_bind_mount()
-{
- container="$1"
-
- podman inspect --format "[{{range .Mounts}}{{.Dst}} {{end}}]" --type container "$container" 2>&3 \
- | grep /etc/profile.d/toolbox.sh >/dev/null 2>/dev/null 2>&3
-
- return "$?"
-}
-
-
-list_container_names()
-(
- if ! containers_old=$(podman ps \
- --all \
- --filter "label=com.redhat.component=fedora-toolbox" \
- --format "{{.Names}}" 2>&3); then
- echo "$base_toolbox_command: failed to list containers with com.redhat.component=fedora-toolbox" >&2
- return 1
- fi
-
- if ! containers=$(podman ps \
- --all \
- --filter "label=com.github.debarshiray.toolbox=true" \
- --format "{{.Names}}" 2>&3); then
- echo "$base_toolbox_command: failed to list containers with com.github.debarshiray.toolbox=true" >&2
- return 1
- fi
-
- printf "%s\n%s\n" "$containers_old" "$containers" | sort 2>&3 | uniq 2>&3
- return 0
-)
-
-
-pull_base_toolbox_image()
-(
- domain=""
- has_domain=false
- prompt_for_download=true
- pull_image=false
-
- if image_reference_can_be_id "$base_toolbox_image"; then
- echo "$base_toolbox_command: looking for image $base_toolbox_image" >&3
-
- if podman image exists "$base_toolbox_image" >/dev/null 2>&3; then
- return 0
- fi
- fi
-
- image_reference_has_domain "$base_toolbox_image" && has_domain=true
-
- if ! $has_domain; then
- echo "$base_toolbox_command: looking for image localhost/$base_toolbox_image" >&3
-
- if podman image exists localhost/$base_toolbox_image >/dev/null 2>&3; then
- return 0
- fi
- fi
-
- if $has_domain; then
- base_toolbox_image_full="$base_toolbox_image"
- else
- base_toolbox_image_full="$registry/$fgc/$base_toolbox_image"
- fi
-
- echo "$base_toolbox_command: looking for image $base_toolbox_image_full" >&3
-
- if podman image exists "$base_toolbox_image_full" >/dev/null 2>&3; then
- return 0
- fi
-
- domain=$(image_reference_get_domain "$base_toolbox_image_full")
- if $assume_yes || [ "$domain" = "localhost" ] 2>&3; then
- prompt_for_download=false
- pull_image=true
- fi
-
- if $prompt_for_download; then
- echo "Image required to create toolbox container."
-
- prompt=$(printf "Download %s (500MB)? [y/N]:" "$base_toolbox_image_full")
- if ask_for_confirmation "n" "$prompt"; then
- pull_image=true
- else
- pull_image=false
- fi
- fi
-
- if ! $pull_image; then
- return 1
- fi
-
- echo "$base_toolbox_command: pulling image $base_toolbox_image_full" >&3
-
- if spinner_directory=$(mktemp --directory --tmpdir $spinner_template 2>&3); then
- spinner_message="Pulling $base_toolbox_image_full: "
- if ! spinner_start "$spinner_directory" "$spinner_message"; then
- spinner_directory=""
- fi
- else
- echo "$base_toolbox_command: unable to start spinner: spinner directory not created" >&2
- spinner_directory=""
- fi
-
- podman pull $base_toolbox_image_full >/dev/null 2>&3
- ret_val=$?
-
- if [ "$spinner_directory" != "" ]; then
- spinner_stop "$spinner_directory"
- fi
-
- if [ "$ret_val" -ne 0 ] 2>&3; then
- echo "$base_toolbox_command: failed to pull base image $base_toolbox_image" >&2
- fi
-
- return $ret_val
-)
-
-
-unshare_userns_rm()
-(
- path="$1"
-
- if ! unshare_directory=$(mktemp --directory --tmpdir "toolbox-unshare-userns-rm-XXXXXXXXXX" 2>&3); then
- echo "$base_toolbox_command: failed to enter user namespace: directory couldn't be created" >&2
- return 1
- fi
-
- if ! touch "$unshare_directory/map" 2>&3; then
- echo "$base_toolbox_command: failed to enter user namespace: file couldn't be created" >&2
- return 1
- fi
-
- exec 4>"$unshare_directory/map"
- if ! flock 4 2>&3; then
- echo "$base_toolbox_command: failed to enter user namespace: lock couldn't be acquired" >&2
- return 1
- fi
-
- echo "$base_toolbox_command: parsing /etc/subgid" >&3
-
- if ! subgid_entry=$(grep "^$USER:" /etc/subgid 2>&3); then
- echo "$base_toolbox_command: failed to enter user namespace: no entry in /etc/subgid" >&2
- return 1
- fi
-
- userns_gid_start=$(echo "$subgid_entry" | cut --delimiter ":" --fields 2 2>&3)
- if ! is_integer "$userns_gid_start"; then
- echo "$base_toolbox_command: failed to enter user namespace: cannot parse the first sub-GID" >&2
- return 1
- fi
-
- userns_gid_len=$(echo "$subgid_entry" | cut --delimiter ":" --fields 3 2>&3)
- if ! is_integer "$userns_gid_len"; then
- echo "$base_toolbox_command: failed to enter user namespace: cannot parse the sub-GID count" >&2
- return 1
- fi
-
- echo "$base_toolbox_command: parsing /etc/subuid" >&3
-
- if ! subuid_entry=$(grep "^$USER:" /etc/subuid 2>&3); then
- echo "$base_toolbox_command: failed to enter user namespace: no entry in /etc/subuid" >&2
- return 1
- fi
-
- userns_uid_start=$(echo "$subuid_entry" | cut --delimiter ":" --fields 2 2>&3)
- if ! is_integer "$userns_uid_start"; then
- echo "$base_toolbox_command: failed to enter user namespace: cannot parse the first sub-UID" >&2
- return 1
- fi
-
- userns_uid_len=$(echo "$subuid_entry" | cut --delimiter ":" --fields 3 2>&3)
- if ! is_integer "$userns_uid_len"; then
- echo "$base_toolbox_command: failed to enter user namespace: cannot parse the sub-UID count" >&2
- return 1
- fi
-
- echo "$base_toolbox_command: unsharing user namespace" >&3
-
- unshare --user sh -c "flock $unshare_directory/map rm --force --recursive $path" 2>&3 &
- unshare_pid="$!"
-
- echo "$base_toolbox_command: setting GID and UID map of user namespace" >&3
-
- if ! newgidmap "$unshare_pid" 0 "$user_id_real" 1 1 "$userns_gid_start" "$userns_gid_len" 2>&3; then
- echo "$base_toolbox_command: failed to set GID mapping of user namespace" >&2
- kill -9 "$unshare_pid" 2>&3
- return 1
- fi
-
- if ! newuidmap "$unshare_pid" 0 "$user_id_real" 1 1 "$userns_uid_start" "$userns_uid_len" 2>&3; then
- echo "$base_toolbox_command: failed to set UID mapping of user namespace" >&2
- kill -9 "$unshare_pid" 2>&3
- return 1
- fi
-
- echo "$base_toolbox_command: GID map of user namespace:" >&3
- cat /proc/"$unshare_pid"/gid_map 1>&3 2>&3
-
- echo "$base_toolbox_command: UID map of user namespace:" >&3
- cat /proc/"$unshare_pid"/uid_map 1>&3 2>&3
-
- if ! flock --unlock 4 2>&3; then
- echo "$base_toolbox_command: failed to remove $path: lock couldn't be unlocked" >&2
- kill -9 "$unshare_pid" 2>&3
- return 1
- fi
-
- if ! wait "$unshare_pid" 2>&3; then
- echo "$base_toolbox_command: failed to remove $path" >&2
- return 1
- fi
-
- rm --force --recursive "$unshare_directory" 2>&3
-
- return 0
-)
-
-
-create()
-(
- enter_command_skip="$1"
-
- dbus_system_bus_address="unix:path=/var/run/dbus/system_bus_socket"
- home_link=""
- flatpak_system_directory_bind=""
- kcm_socket=""
- kcm_socket_bind=""
- libvirt_system_directory_bind=""
- run_media_path_bind=""
- toolbox_profile_bind=""
- ulimit_host=""
- usr_mount_destination_flags="ro"
-
- # shellcheck disable=SC2153
- if [ "$DBUS_SYSTEM_BUS_ADDRESS" != "" ]; then
- dbus_system_bus_address=$DBUS_SYSTEM_BUS_ADDRESS
- fi
- dbus_system_bus_path=$(echo "$dbus_system_bus_address" | cut --delimiter = --fields 2 2>&3)
- dbus_system_bus_path=$(readlink --canonicalize "$dbus_system_bus_path" 2>&3)
-
- if [ -d /var/lib/flatpak ] 2>&3; then
- flatpak_system_directory_bind="--volume /var/lib/flatpak:/var/lib/flatpak:ro"
- fi
-
- # Note that 'systemctl show ...' doesn't terminate with a non-zero exit
- # code when used with an unknown unit. eg.:
- # $ systemctl show --value --property Listen foo
- # $ echo $?
- # 0
- if ! kcm_socket_listen=$(systemctl show --value --property Listen sssd-kcm.socket 2>&3); then
- echo "$base_toolbox_command: failed to use 'systemctl show'" >&3
- kcm_socket_listen=""
- elif [ "$kcm_socket_listen" = "" ] 2>&3; then
- echo "$base_toolbox_command: failed to read property Listen from sssd-kcm.socket" >&3
- else
- echo "$base_toolbox_command: checking value $kcm_socket_listen of property Listen in sssd-kcm.socket" >&3
-
- if ! (echo "$kcm_socket_listen" | grep " (Stream)$" >/dev/null 2>&3); then
- echo "$base_toolbox_command: unknown socket in sssd-kcm.socket" >&2
- echo "$base_toolbox_command: expected SOCK_STREAM" >&2
- kcm_socket_listen=""
- elif ! (echo "$kcm_socket_listen" | grep "^/" >/dev/null 2>&3); then
- echo "$base_toolbox_command: unknown socket in sssd-kcm.socket" >&2
- echo "$base_toolbox_command: expected file system socket in the AF_UNIX family" >&2
- kcm_socket_listen=""
- fi
- fi
-
- echo "$base_toolbox_command: parsing value $kcm_socket_listen of property Listen in sssd-kcm.socket" >&3
-
- if [ "$kcm_socket_listen" != "" ] 2>&3; then
- kcm_socket=${kcm_socket_listen%" (Stream)"}
- kcm_socket_bind="--volume $kcm_socket:$kcm_socket"
- fi
-
- if [ -d /run/libvirt ] 2>&3; then
- libvirt_system_directory_bind="--volume /run/libvirt:/run/libvirt"
- fi
-
- echo "$base_toolbox_command: checking if 'podman create' supports --ulimit host" >&3
-
- if man podman-create 2>&3 | grep "You can pass host" >/dev/null 2>&3; then
- echo "$base_toolbox_command: 'podman create' supports --ulimit host" >&3
-
- ulimit_host="--ulimit host"
- fi
-
- if ! pull_base_toolbox_image; then
- return 1
- fi
-
- if image_reference_has_domain "$base_toolbox_image"; then
- base_toolbox_image_full="$base_toolbox_image"
- else
- if ! base_toolbox_image_full=$(podman inspect \
- --format "{{index .RepoTags 0}}" \
- --type image \
- "$base_toolbox_image" 2>&3); then
- echo "$base_toolbox_command: failed to get RepoTag for base image $base_toolbox_image" >&2
- return 1
- fi
-
- echo "$base_toolbox_command: base image $base_toolbox_image resolved to $base_toolbox_image_full" >&3
- fi
-
- echo "$base_toolbox_command: checking if container $toolbox_container already exists" >&3
-
- enter_command=$(create_enter_command "$toolbox_container")
- if podman container exists $toolbox_container >/dev/null 2>&3; then
- echo "$base_toolbox_command: container $toolbox_container already exists" >&2
- echo "Enter with: $enter_command" >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
- return 1
- fi
-
- if ! group_for_sudo=$(get_group_for_sudo); then
- echo "$base_toolbox_command: failed to create container $toolbox_container: group for sudo not found" >&2
- return 1
- fi
-
- if [ -f /etc/profile.d/toolbox.sh ] 2>&3; then
- toolbox_profile_bind="--volume /etc/profile.d/toolbox.sh:/etc/profile.d/toolbox.sh:ro"
- fi
-
- if [ -d /run/media ] 2>&3; then
- run_media_path_bind="--volume /run/media:/run/media:rslave"
- fi
-
- echo "$base_toolbox_command: checking if /usr is mounted read-only or read-write" >&3
-
- if ! usr_mount_point=$(df --output=target /usr | tail --lines 1 2>&3); then
- echo "$base_toolbox_command: failed to get the mount-point of /usr" >&2
- else
- echo "$base_toolbox_command: mount-point of /usr is $usr_mount_point" >&3
-
- if ! usr_mount_source_flags=$(findmnt --noheadings --output OPTIONS "$usr_mount_point" 2>&3); then
- echo "$base_toolbox_command: failed to get the mount options of $usr_mount_point" >&2
- else
- echo "$base_toolbox_command: mount flags of /usr on the host are $usr_mount_source_flags" >&3
-
- if echo "$usr_mount_source_flags" | grep --invert-match "ro" >/dev/null 2>&3; then
- usr_mount_destination_flags="rw"
- fi
- fi
- fi
-
- if ! home_canonical=$(readlink --canonicalize "$HOME" 2>&3); then
- echo "$base_toolbox_command: failed to canonicalize $HOME" >&2
- return 1
- fi
-
- echo "$base_toolbox_command: $HOME canonicalized to $home_canonical" >&3
-
- echo "$base_toolbox_command: checking if /home is a symbolic link to /var/home" >&3
-
- if [ "$(readlink /home)" = var/home ] 2>&3; then
- echo "$base_toolbox_command: /home is a symbolic link to /var/home" >&3
- home_link="--home-link"
- fi
-
- echo "$base_toolbox_command: calling org.freedesktop.Flatpak.SessionHelper.RequestSession" >&3
-
- if ! gdbus call \
- --session \
- --dest org.freedesktop.Flatpak \
- --object-path /org/freedesktop/Flatpak/SessionHelper \
- --method org.freedesktop.Flatpak.SessionHelper.RequestSession >/dev/null 2>&3; then
- echo "$base_toolbox_command: failed to call org.freedesktop.Flatpak.SessionHelper.RequestSession" >&2
- exit 1
- fi
-
- echo "$base_toolbox_command: creating container $toolbox_container" >&3
-
- if spinner_directory=$(mktemp --directory --tmpdir $spinner_template 2>&3); then
- spinner_message="Creating container $toolbox_container: "
- if ! spinner_start "$spinner_directory" "$spinner_message"; then
- spinner_directory=""
- fi
- else
- echo "$base_toolbox_command: unable to start spinner: spinner directory not created" >&2
- spinner_directory=""
- fi
-
- # shellcheck disable=SC2086
- podman create \
- --dns none \
- --env TOOLBOX_PATH="$TOOLBOX_PATH" \
- --group-add "$group_for_sudo" \
- --hostname toolbox \
- --ipc host \
- --label "com.github.containers.toolbox=true" \
- --label "com.github.debarshiray.toolbox=true" \
- --name $toolbox_container \
- --network host \
- --no-hosts \
- --pid host \
- --privileged \
- --security-opt label=disable \
- $ulimit_host \
- --userns=keep-id \
- --user root:root \
- $flatpak_system_directory_bind \
- $kcm_socket_bind \
- $libvirt_system_directory_bind \
- $run_media_path_bind \
- $toolbox_profile_bind \
- --volume "$TOOLBOX_PATH":/usr/bin/toolbox:ro \
- --volume "$XDG_RUNTIME_DIR":"$XDG_RUNTIME_DIR" \
- --volume "$XDG_RUNTIME_DIR"/.flatpak-helper/monitor:/run/host/monitor \
- --volume "$dbus_system_bus_path":"$dbus_system_bus_path" \
- --volume "$home_canonical":"$home_canonical":rslave \
- --volume /etc:/run/host/etc \
- --volume /dev:/dev:rslave \
- --volume /media:/media:rslave \
- --volume /mnt:/mnt:rslave \
- --volume /run:/run/host/run:rslave \
- --volume /tmp:/run/host/tmp:rslave \
- --volume /usr:/run/host/usr:"$usr_mount_destination_flags",rslave \
- --volume /var:/run/host/var:rslave \
- "$base_toolbox_image_full" \
- toolbox --verbose init-container \
- --home "$HOME" \
- $home_link \
- --monitor-host \
- --shell "$SHELL" \
- --uid "$user_id_real" \
- --user "$USER" >/dev/null 2>&3
- ret_val=$?
-
- if [ "$spinner_directory" != "" ]; then
- spinner_stop "$spinner_directory"
- fi
-
- if [ $ret_val -ne 0 ]; then
- echo "$base_toolbox_command: failed to create container $toolbox_container" >&2
- return 1
- fi
-
- if ! $enter_command_skip; then
- echo "Created container: $toolbox_container"
- echo "Enter with: $enter_command"
- fi
-
- return 0
-)
-
-
-enter()
-(
- emit_escape_sequence=false
- host_id=$(get_host_id)
- host_variant_id=$(get_host_variant_id)
-
- if [ "$host_id" = "fedora" ] 2>&3 \
- && { [ "$host_variant_id" = "silverblue" ] 2>&3 || [ "$host_variant_id" = "workstation" ] 2>&3; }; then
- emit_escape_sequence=true
- fi
-
- run "$emit_escape_sequence" true false "$SHELL" -l
-)
-
-
-init_container()
-{
- init_container_home="$1"
- init_container_home_link="$2"
- init_container_monitor_host="$3"
- init_container_shell="$4"
- init_container_uid="$5"
- init_container_user="$6"
-
- if [ "$XDG_RUNTIME_DIR" = "" ] 2>&3; then
- echo "$base_toolbox_command: XDG_RUNTIME_DIR is unset" >&3
-
- XDG_RUNTIME_DIR=/run/user/"$init_container_uid"
- echo "$base_toolbox_command: XDG_RUNTIME_DIR set to $XDG_RUNTIME_DIR" >&3
-
- toolbox_runtime_directory="$XDG_RUNTIME_DIR"/toolbox
- fi
-
- init_container_initialized_stamp="$toolbox_runtime_directory"/container-initialized-"$$"
-
- echo "$base_toolbox_command: creating /run/.toolboxenv" >&3
-
- if ! touch /run/.toolboxenv 2>&3; then
- echo "$base_toolbox_command: failed to create /run/.toolboxenv" >&2
- return 1
- fi
-
- if $init_container_monitor_host; then
- working_directory="$PWD"
-
- if [ -d /run/host/etc ] 2>&3; then
- if ! readlink /etc/host.conf >/dev/null 2>&3; then
- echo "$base_toolbox_command: redirecting /etc/host.conf to /run/host/etc/host.conf" >&3
-
- if ! (cd /etc 2>&3 \
- && rm --force host.conf 2>&3 \
- && ln --symbolic /run/host/etc/host.conf host.conf 2>&3); then
- echo "$base_toolbox_command: failed to redirect /etc/host.conf to /run/host/etc/host.conf" >&2
- return 1
- fi
- fi
-
- if ! readlink /etc/hosts >/dev/null 2>&3; then
- echo "$base_toolbox_command: redirecting /etc/hosts to /run/host/etc/hosts" >&3
-
- if ! (cd /etc 2>&3 \
- && rm --force hosts 2>&3 \
- && ln --symbolic /run/host/etc/hosts hosts 2>&3); then
- echo "$base_toolbox_command: failed to redirect /etc/hosts to /run/host/etc/hosts" >&2
- return 1
- fi
- fi
-
- if ! readlink /etc/resolv.conf >/dev/null 2>&3; then
- echo "$base_toolbox_command: redirecting /etc/resolv.conf to /run/host/etc/resolv.conf" >&3
-
- if ! (cd /etc 2>&3 \
- && rm --force resolv.conf 2>&3 \
- && ln --symbolic /run/host/etc/resolv.conf resolv.conf 2>&3); then
- echo "$base_toolbox_command: failed to redirect /etc/resolv.conf to /run/host/etc/resolv.conf" \
- >&2
- return 1
- fi
- fi
- fi
-
- if [ -d /run/host/monitor ] 2>&3; then
- if ! localtime_target=$(readlink /etc/localtime >/dev/null 2>&3) \
- || [ "$localtime_target" != "/run/host/monitor/localtime" ] 2>&3; then
- echo "$base_toolbox_command: redirecting /etc/localtime to /run/host/monitor/localtime" >&3
-
- if ! (cd /etc 2>&3 \
- && rm --force localtime 2>&3 \
- && ln --symbolic /run/host/monitor/localtime localtime 2>&3); then
- echo "$base_toolbox_command: failed to redirect /etc/localtime to /run/host/monitor/localtime" \
- >&2
- return 1
- fi
- fi
-
- if ! readlink /etc/timezone >/dev/null 2>&3; then
- echo "$base_toolbox_command: redirecting /etc/timezone to /run/host/monitor/timezone" >&3
-
- if ! (cd /etc 2>&3 \
- && rm --force timezone 2>&3 \
- && ln --symbolic /run/host/monitor/timezone timezone 2>&3); then
- echo "$base_toolbox_command: failed to redirect /etc/timezone to /run/host/monitor/timezone" >&2
- return 1
- fi
- fi
- fi
-
- if ! cd "$working_directory" 2>&3; then
- echo "$base_toolbox_command: failed to restore working directory" >&2
- fi
- fi
-
- if ! id -u "$init_container_user" >/dev/null 2>&3; then
- if $init_container_home_link ; then
- echo "$base_toolbox_command: making /home a symlink" >&3
-
- # shellcheck disable=SC2174
- if ! (rmdir /home 2>&3 \
- && mkdir --mode 0755 --parents /var/home 2>&3 \
- && ln --symbolic var/home /home 2>&3); then
- echo "$base_toolbox_command: failed to make /home a symlink" >&2
- return 1
- fi
- fi
-
- if ! groups=$(get_group_for_sudo); then
- echo "$base_toolbox_command: failed to add user $init_container_user: group for sudo not found" >&2
- return 1
- fi
-
- echo "$base_toolbox_command: adding user $init_container_user with UID $init_container_uid" >&3
-
- if ! useradd \
- --home-dir "$init_container_home" \
- --no-create-home \
- --shell "$init_container_shell" \
- --uid "$init_container_uid" \
- --groups "$groups" \
- "$init_container_user" >/dev/null 2>&3; then
- echo "$base_toolbox_command: failed to add user $init_container_user with UID $init_container_uid" >&2
- return 1
- fi
-
- echo "$base_toolbox_command: removing password for user $init_container_user" >&3
-
- if ! passwd --delete "$init_container_user" >/dev/null 2>&3; then
- echo "$base_toolbox_command: failed to remove password for user $init_container_user" >&2
- return 1
- fi
-
- echo "$base_toolbox_command: removing password for user root" >&3
-
- if ! passwd --delete root >/dev/null 2>&3; then
- echo "$base_toolbox_command: failed to remove password for user root" >&2
- return 1
- fi
-
- fi
-
- if [ -d /etc/krb5.conf.d ] 2>&3 && ! [ -f /etc/krb5.conf.d/kcm_default_ccache ] 2>&3; then
- echo "$base_toolbox_command: setting KCM as the default Kerberos credential cache" >&3
-
- cat <<EOF >/etc/krb5.conf.d/kcm_default_ccache 2>&3
-# Written by Toolbox
-# https://github.com/debarshiray/toolbox
-#
-# # To disable the KCM credential cache, comment out the following lines.
-
-[libdefaults]
- default_ccache_name = KCM:
-EOF
- ret_val=$?
-
- if [ "$ret_val" -ne 0 ] 2>&3; then
- echo "$base_toolbox_command: failed to set KCM as the default Kerberos credential cache" >&2
- return 1
- fi
- fi
-
- echo "$base_toolbox_command: finished initializing container" >&3
-
- if ! touch "$init_container_initialized_stamp" 2>&3; then
- echo "$base_toolbox_command: failed to create initialization stamp" >&2
- return 1
- fi
-
- echo "$base_toolbox_command: going to sleep" >&3
-
- exec sleep +Inf
-}
-
-
-run()
-(
- emit_escape_sequence="$1"
- fallback_to_bash="$2"
- pedantic="$3"
- program="$4"
- shift 4
-
- create_toolbox_container=false
- prompt_for_create=true
-
- echo "$base_toolbox_command: checking if container $toolbox_container exists" >&3
-
- if ! podman container exists "$toolbox_container" 2>&3; then
- echo "$base_toolbox_command: container $toolbox_container not found" >&3
-
- if podman container exists "$toolbox_container_old_v1" 2>&3; then
- echo "$base_toolbox_command: container $toolbox_container_old_v1 found" >&3
-
- # shellcheck disable=SC2030
- toolbox_container="$toolbox_container_old_v1"
- elif podman container exists "$toolbox_container_old_v2" 2>&3; then
- echo "$base_toolbox_command: container $toolbox_container_old_v2 found" >&3
-
- # shellcheck disable=SC2030
- toolbox_container="$toolbox_container_old_v2"
- else
- if $pedantic; then
- enter_print_container_not_found "$toolbox_container"
- exit 1
- fi
-
- if ! containers=$(list_container_names); then
- enter_print_container_not_found "$toolbox_container"
- exit 1
- fi
-
- containers_count=$(echo "$containers" | grep --count . 2>&3)
- if ! is_integer "$containers_count"; then
- enter_print_container_not_found "$toolbox_container"
- exit 1
- fi
-
- echo "$base_toolbox_command: found $containers_count containers" >&3
-
- if [ "$containers_count" -eq 0 ] 2>&3; then
- if $assume_yes; then
- create_toolbox_container=true
- prompt_for_create=false
- fi
-
- if $prompt_for_create; then
- prompt="No toolbox containers found. Create now? [y/N]"
- if ask_for_confirmation "n" "$prompt"; then
- create_toolbox_container=true
- else
- create_toolbox_container=false
- fi
- fi
-
- if ! $create_toolbox_container; then
- echo "A container can be created later with the 'create' command." >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
- exit 1
- fi
-
- if ! update_container_and_image_names; then
- exit 1
- fi
-
- if ! create true; then
- exit 1
- fi
- elif [ "$containers_count" -eq 1 ] 2>&3 \
- && [ "$toolbox_container" = "$toolbox_container_default" ] 2>&3; then
- echo "$base_toolbox_command: container $toolbox_container not found" >&2
-
- toolbox_container=$(echo "$containers" | grep . 2>&3 | head --lines 1 2>&3)
- echo "Entering container $toolbox_container instead." >&2
- echo "Use the 'create' command to create a different toolbox." >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
- else
- echo "$base_toolbox_command: container $toolbox_container not found" >&2
- echo "Use the '--container' option to select a toolbox." >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
- exit 1
- fi
- fi
- fi
-
- echo "$base_toolbox_command: calling org.freedesktop.Flatpak.SessionHelper.RequestSession" >&3
-
- if ! gdbus call \
- --session \
- --dest org.freedesktop.Flatpak \
- --object-path /org/freedesktop/Flatpak/SessionHelper \
- --method org.freedesktop.Flatpak.SessionHelper.RequestSession >/dev/null 2>&3; then
- echo "$base_toolbox_command: failed to call org.freedesktop.Flatpak.SessionHelper.RequestSession" >&2
- exit 1
- fi
-
- echo "$base_toolbox_command: starting container $toolbox_container" >&3
-
- if is_etc_profile_d_toolbox_a_bind_mount "$toolbox_container"; then
- echo "$base_toolbox_command: /etc/profile.d/toolbox.sh already mounted in container $toolbox_container" >&3
-
- if ! container_start "$toolbox_container"; then
- exit 1
- fi
- else
- echo "$base_toolbox_command: /etc/profile.d/toolbox.sh not mounted in container $toolbox_container" >&3
-
- if ! copy_etc_profile_d_toolbox_to_runtime_directory; then
- exit 1
- fi
-
- if ! container_start "$toolbox_container"; then
- exit 1
- fi
-
- if ! copy_etc_profile_d_toolbox_to_container "$toolbox_container"; then
- exit 1
- fi
- fi
-
- echo "$base_toolbox_command: inspecting entry point of container $toolbox_container" >&3
-
- if ! entry_point=$(podman inspect --format "{{index .Config.Cmd 0}}" --type container "$toolbox_container" 2>&3); then
- echo "$base_toolbox_command: failed to inspect entry point of container $toolbox_container" >&2
- exit 1
- fi
-
- echo "$base_toolbox_command: entry point of container $toolbox_container is $entry_point" >&3
-
- if [ "$entry_point" = "toolbox" ] 2>&3; then
- echo "$base_toolbox_command: waiting for container $toolbox_container to finish initializing" >&3
-
- if ! entry_point_pid=$(podman inspect --format "{{.State.Pid}}" --type container "$toolbox_container" 2>&3); then
- echo "$base_toolbox_command: failed to inspect entry point PID of container $toolbox_container" >&2
- exit 1
- fi
-
- if ! is_integer "$entry_point_pid"; then
- echo "$base_toolbox_command: failed to parse entry point PID of container $toolbox_container" >&2
- exit 1
- fi
-
- if [ "$entry_point_pid" -le 0 ] 2>&3; then
- echo "$base_toolbox_command: invalid entry point PID of container $toolbox_container" >&2
- exit 1
- fi
-
- container_initialized_stamp="$toolbox_runtime_directory/container-initialized-$entry_point_pid"
- container_initialized_timeout=25 #s
-
- i=0
- while ! [ -f "$container_initialized_stamp" ] 2>&3; do
- sleep 1 2>&3
-
- i=$((i + 1))
- if [ "$i" -eq "$container_initialized_timeout" ] 2>&3; then
- echo "$base_toolbox_command: failed to initialize container $toolbox_container" >&2
- exit 1
- fi
- done
- fi
-
- if ! podman exec --user root:root "$toolbox_container" touch /run/.toolboxenv 2>&3; then
- echo "$base_toolbox_command: failed to create /run/.toolboxenv in container $toolbox_container" >&2
- exit 1
- fi
-
- set_environment=$(create_environment_options)
-
- echo "$base_toolbox_command: looking for $program in container $toolbox_container" >&3
-
- # shellcheck disable=SC2016
- if ! podman exec \
- --user "$USER" \
- "$toolbox_container" \
- sh -c 'command -v "$1"' sh "$program" >/dev/null 2>&3; then
- if $fallback_to_bash; then
- echo "$base_toolbox_command: $program not found in $toolbox_container; using /bin/bash instead" >&3
- program=/bin/bash
- else
- echo "$base_toolbox_command: command '$program' not found in container $toolbox_container" >&2
- exit 127
- fi
- fi
-
- echo "$base_toolbox_command: running in container $toolbox_container:" >&3
- echo "$base_toolbox_command: $program" >&3
- for i in "$@"; do
- echo "$base_toolbox_command: $i" >&3
- done
-
- $emit_escape_sequence && printf "\033]777;container;push;%s;toolbox\033\\" "$toolbox_container"
-
- # shellcheck disable=SC2016
- # for the command passed to capsh
- # shellcheck disable=SC2086
- podman exec \
- --interactive \
- --tty \
- --user "$USER" \
- --workdir "$PWD" \
- $set_environment \
- "$toolbox_container" \
- capsh --caps="" -- -c 'exec "$@"' /bin/sh "$program" "$@" 2>&3
- ret_val="$?"
-
- $emit_escape_sequence && printf "\033]777;container;pop;;\033\\"
-
- exit "$ret_val"
-)
-
-
-help()
-(
- to_help_command="$1"
-
- if [ "$to_help_command" = "" ] 2>&3 || [ "$to_help_command" = "$base_toolbox_command" ] 2>&3; then
- exec man toolbox 2>&1
- fi
-
- exec man toolbox-"$to_help_command" 2>&1
-)
-
-
-list_images()
-(
- output=""
-
- if ! images_old=$(podman images \
- --filter "label=com.redhat.component=fedora-toolbox" \
- --format "{{.Repository}}:{{.Tag}}" 2>&3); then
- echo "$base_toolbox_command: failed to list images with com.redhat.component=fedora-toolbox" >&2
- return 1
- fi
-
- if ! images=$(podman images \
- --filter "label=com.github.debarshiray.toolbox=true" \
- --format "{{.Repository}}:{{.Tag}}" 2>&3); then
- echo "$base_toolbox_command: failed to list images with com.github.debarshiray.toolbox=true" >&2
- return 1
- fi
-
- images=$(printf "%s\n%s\n" "$images_old" "$images" | sort 2>&3 | uniq 2>&3)
- if ! details=$(images_get_details "$images"); then
- return 1
- fi
-
- if [ "$details" != "" ] 2>&3; then
- table_data=$(printf "%s\t%s\t%s\n" "IMAGE ID" "IMAGE NAME" "CREATED"; echo "$details")
- if ! output=$(echo "$table_data" | sed "s/ \{2,\}/\t/g" 2>&3 | column -s "$tab" -t 2>&3); then
- echo "$base_toolbox_command: failed to parse list of images" >&2
- return 1
- fi
- fi
-
- if [ "$output" != "" ]; then
- echo "$output"
- fi
-
- return 0
-)
-
-
-containers_get_details()
-(
- containers="$1"
-
- if ! echo "$containers" | while read -r container; do
- [ "$container" = "" ] 2>&3 && continue
-
- if ! podman ps --all \
- --filter "name=$container" \
- --format "{{.ID}} {{.Names}} {{.Created}} {{.Status}} {{.Image}}" 2>&3; then
- echo "$base_toolbox_command: failed to get details for container $container" >&2
- return 1
- fi
- done; then
- return 1
- fi
-
- return 0
-)
-
-
-list_containers()
-(
- output=""
-
- if ! containers=$(list_container_names); then
- return 1
- fi
-
- if ! details=$(containers_get_details "$containers"); then
- return 1
- fi
-
- if [ "$details" != "" ] 2>&3; then
- table_data=$(printf "%s\t%s\t%s\t%s\t%s\n" "CONTAINER ID" "CONTAINER NAME" "CREATED" "STATUS" "IMAGE NAME"
- echo "$details")
- if ! output=$(echo "$table_data" | sed "s/ \{2,\}/\t/g" 2>&3 | column -s "$tab" -t 2>&3); then
- echo "$base_toolbox_command: failed to parse list of containers" >&2
- return 1
- fi
- fi
-
- if [ "$output" != "" ]; then
- echo "$output" | head --lines 1 2>&3
-
- echo "$output" | tail --lines +2 2>&3 \
- | (
- while read -r container; do
- id=$(echo "$container" | cut --delimiter " " --fields 1 2>&3)
- is_running=$(podman inspect "$id" --format "{{.State.Running}}" 2>&3)
- if $is_running; then
- # shellcheck disable=SC2059
- printf "${LGC}$container${NC}\n"
- else
- echo "$container"
- fi
- done
- )
- fi
-
- return 0
-)
-
-
-migrate()
-(
- configuration_directory="$HOME/.config/toolbox"
- migrate_stamp="$configuration_directory/podman-system-migrate"
-
- migrate_lock="$toolbox_runtime_directory"/migrate.lock
-
- if ! version=$(podman version --format "{{.Version}}" 2>&3); then
- echo "$base_toolbox_command: unable to migrate containers: Podman version couldn't be read" >&2
- return 1
- fi
-
- echo "$base_toolbox_command: current Podman version is $version" >&3
-
- if ! mkdir --parents "$configuration_directory" 2>&3; then
- echo "$base_toolbox_command: unable to migrate containers: configuration directory not created" >&2
- return 1
- fi
-
- # shellcheck disable=SC2174
- if ! mkdir --mode 700 --parents "$toolbox_runtime_directory" 2>&3; then
- echo "$base_toolbox_command: unable to migrate containers: runtime directory not created" >&2
- return 1
- fi
-
- exec 5>"$migrate_lock"
- if ! flock 5 2>&3; then
- echo "$base_toolbox_command: unable to migrate containers: migration lock not acquired" >&3
- return 1
- fi
-
- if [ -f "$migrate_stamp" ] 2>&3; then
- if grep "$version" "$migrate_stamp" >/dev/null 2>&3; then
- echo "$base_toolbox_command: migration not needed: Podman version $version is unchanged" >&3
- return 0
- fi
-
- if ! version_old=$(printf "%s\n" "$version" \
- | cat "$migrate_stamp" - 2>&3 \
- | sort --version-sort 2>&3 \
- | head --lines 1 2>&3); then
- echo "$base_toolbox_command: unable to migrate containers: Podman versions couldn't be sorted" >&2
- return 1
- fi
-
- if [ "$version" = "$version_old" ] 2>&3; then
- echo "$base_toolbox_command: migration not needed: Podman version $version is old" >&3
- return 0
- fi
- fi
-
- if ! podman system migrate >/dev/null 2>&3; then
- echo "$base_toolbox_command: unable to migrate containers" >&2
- return 1
- fi
-
- echo "$version" >"$migrate_stamp"
- return 0
-)
-
-
-remove_containers()
-(
- ids=$1
- all=$2
- force=$3
-
- ret_val=0
-
- $force && force_option="--force"
-
- if $all; then
- if ! ids_old=$(podman ps \
- --all \
- --filter "label=com.redhat.component=fedora-toolbox" \
- --format "{{.ID}}" 2>&3); then
- echo "$base_toolbox_command: failed to list containers with com.redhat.component=fedora-toolbox" >&2
- return 1
- fi
-
- if ! ids=$(podman ps \
- --all \
- --filter "label=com.github.debarshiray.toolbox=true" \
- --format "{{.ID}}" 2>&3); then
- echo "$base_toolbox_command: failed to list containers with com.github.debarshiray.toolbox=true" >&2
- return 1
- fi
-
- ids=$(printf "%s\n%s\n" "$ids_old" "$ids" | sort 2>&3 | uniq 2>&3)
- if [ "$ids" != "" ]; then
- ret_val=$(echo "$ids" \
- | (
- while read -r id; do
- if ! podman rm $force_option "$id" >/dev/null 2>&3; then
- echo "$base_toolbox_command: failed to remove container $id" >&2
- ret_val=1
- fi
- done
-
- echo "$ret_val"
- )
- )
- fi
- else
- ret_val=$(echo "$ids" \
- | sed "s/ \+/\n/g" 2>&3 \
- | (
- while read -r id; do
- if ! labels=$(podman inspect \
- --format "{{.Config.Labels}}" \
- --type container \
- "$id" 2>&3); then
- echo "$base_toolbox_command: failed to inspect $id" >&2
- ret_val=1
- continue
- fi
-
- if ! has_substring "$labels" "com.github.debarshiray.toolbox" \
- && ! has_substring "$labels" "com.redhat.component:fedora-toolbox"; then
- echo "$base_toolbox_command: $id is not a toolbox container" >&2
- ret_val=1
- continue
- fi
-
- if ! podman rm $force_option "$id" >/dev/null 2>&3; then
- echo "$base_toolbox_command: failed to remove container $id" >&2
- ret_val=1
- fi
- done
-
- echo "$ret_val"
- )
- )
- fi
-
- return "$ret_val"
-)
-
-
-remove_images()
-(
- ids=$1
- all=$2
- force=$3
-
- ret_val=0
-
- $force && force_option="--force"
-
- if $all; then
- if ! ids_old=$(podman images \
- --filter "label=com.redhat.component=fedora-toolbox" \
- --format "{{.ID}}" 2>&3); then
- echo "$0: failed to list images with com.redhat.component=fedora-toolbox" >&2
- return 1
- fi
-
- if ! ids=$(podman images \
- --all \
- --filter "label=com.github.debarshiray.toolbox=true" \
- --format "{{.ID}}" 2>&3); then
- echo "$0: failed to list images with com.github.debarshiray.toolbox=true" >&2
- return 1
- fi
-
- ids=$(printf "%s\n%s\n" "$ids_old" "$ids" | sort 2>&3 | uniq 2>&3)
- if [ "$ids" != "" ]; then
- ret_val=$(echo "$ids" \
- | (
- while read -r id; do
- if ! podman rmi $force_option "$id" >/dev/null 2>&3; then
- echo "$base_toolbox_command: failed to remove image $id" >&2
- ret_val=1
- fi
- done
-
- echo "$ret_val"
- )
- )
- fi
- else
- ret_val=$(echo "$ids" \
- | sed "s/ \+/\n/g" 2>&3 \
- | (
- while read -r id; do
- if ! labels=$(podman inspect \
- --format "{{.Labels}}" \
- --type image \
- "$id" 2>&3); then
- echo "$base_toolbox_command: failed to inspect $id" >&2
- ret_val=1
- continue
- fi
-
- if ! has_substring "$labels" "com.github.debarshiray.toolbox" \
- && ! has_substring "$labels" "com.redhat.component:fedora-toolbox"; then
- echo "$base_toolbox_command: $id is not a toolbox image" >&2
- ret_val=1
- continue
- fi
-
- if ! podman rmi $force_option "$id" >/dev/null 2>&3; then
- echo "$base_toolbox_command: failed to remove image $id" >&2
- ret_val=1
- fi
- done
-
- echo "$ret_val"
- )
- )
- fi
-
- return "$ret_val"
-)
-
-
-reset()
-(
- do_reset=false
- prompt_for_reset=true
- ret_val=0
-
- if [ "$user_id_real" -eq 0 ] 2>&3; then
- if [ -d /run/containers ] 2>&3; then
- echo "$base_toolbox_command: The 'reset' command cannot be used after other commands" >&2
- echo "Reboot the system before using it again." >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
- return 1
- fi
- else
- if [ -d "$XDG_RUNTIME_DIR"/overlay-containers ] 2>&3 \
- || [ -d "$XDG_RUNTIME_DIR"/overlay-layers ] 2>&3 \
- || [ -d "$XDG_RUNTIME_DIR"/overlay-locks ] 2>&3; then
- echo "$base_toolbox_command: The 'reset' command cannot be used after other commands" >&2
- echo "Reboot the system before using it again." >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
- return 1
- fi
- fi
-
- if $assume_yes; then
- do_reset=true
- prompt_for_reset=false
- fi
-
- if $prompt_for_reset; then
- echo "All existing podman (and toolbox) containers and images will be removed."
-
- prompt=$(printf "Continue? [y/N]:")
- if ask_for_confirmation "n" "$prompt"; then
- do_reset=true
- else
- do_reset=false
- fi
- fi
-
- if ! $do_reset; then
- return 1
- fi
-
- echo "$base_toolbox_command: resetting local state" >&3
-
- if [ "$user_id_real" -eq 0 ] 2>&3; then
- if ! rm --force --recursive /var/lib/containers/cache >/dev/null 2>&3; then
- echo "$base_toolbox_command: failed to remove /var/lib/containers/cache" >&2
- ret_val=1
- fi
-
- if ! rm --force --recursive /var/lib/containers/sigstore/* >/dev/null 2>&3; then
- echo "$base_toolbox_command: failed to remove the contents of /var/lib/containers/sigstore" >&2
- ret_val=1
- fi
-
- if ! rm --force --recursive /var/lib/containers/storage >/dev/null 2>&3; then
- echo "$base_toolbox_command: failed to remove /var/lib/containers/storage" >&2
- ret_val=1
- fi
- else
- if ! unshare_userns_rm "$HOME/.local/share/containers"; then
- ret_val=1
- fi
-
- if ! rm --force --recursive "$HOME/.config/containers" >/dev/null 2>&3; then
- echo "$base_toolbox_command: failed to remove $HOME/.config/containers" >&2
- ret_val=1
- fi
- fi
-
- if ! rm --force --recursive "$HOME/.config/toolbox" >/dev/null 2>&3; then
- echo "$base_toolbox_command: failed to remove $HOME/.config/toolbox" >&2
- ret_val=1
- fi
-
- return "$ret_val"
-)
-
-
-exit_if_extra_operand()
-{
- if [ "$1" != "" ]; then
- echo "$base_toolbox_command: extra operand '$1'" >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
- exit 1
- fi
-}
-
-
-exit_if_missing_argument()
-{
- if [ "$2" = "" ]; then
- echo "$base_toolbox_command: missing argument for '$1'" >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
- exit 1
- fi
-}
-
-
-exit_if_non_positive_argument()
-{
- if ! is_integer "$2"; then
- echo "$base_toolbox_command: invalid argument for '$1'" >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
- exit 1
- fi
- if [ "$2" -le 0 ] 2>&3; then
- echo "$base_toolbox_command: invalid argument for '$1'" >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
- exit 1
- fi
-}
-
-
-exit_if_unrecognized_option()
-{
- echo "$base_toolbox_command: unrecognized option '$1'" >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
- exit 1
-}
-
-
-# shellcheck disable=SC2120
-forward_to_host()
-(
- if ! command -v flatpak-spawn >/dev/null 2>&3; then
- echo "$base_toolbox_command: flatpak-spawn not found" >&2
- return 1
- fi
-
- eval "set -- $arguments"
-
- set_environment=$(create_environment_options)
-
- echo "$base_toolbox_command: forwarding to host:" >&3
- echo "$base_toolbox_command: $TOOLBOX_PATH" >&3
- for i in "$@"; do
- echo "$base_toolbox_command: $i" >&3
- done
-
- # shellcheck disable=SC2086
- flatpak-spawn $set_environment --host "$TOOLBOX_PATH" "$@" 2>&3
- ret_val="$?"
-
- return "$ret_val"
-)
-
-
-update_container_and_image_names()
-{
- [ "$release" = "" ] 2>&3 && release="$release_default"
-
- if [ "$base_toolbox_image" = "" ] 2>&3; then
- base_toolbox_image="fedora-toolbox:$release"
- else
- release=$(image_reference_get_tag "$base_toolbox_image")
- [ "$release" = "" ] 2>&3 && release="$release_default"
- fi
-
- fgc="f$release"
- echo "$base_toolbox_command: Fedora generational core is $fgc" >&3
-
- echo "$base_toolbox_command: base image is $base_toolbox_image" >&3
-
- toolbox_image=$(create_toolbox_image_name)
- if ! (
- ret_val=$?
- if [ "$ret_val" -ne 0 ] 2>&3; then
- if [ "$ret_val" -eq 100 ] 2>&3; then
- echo "$base_toolbox_command: failed to get the basename of base image $base_toolbox_image" >&2
- else
- echo "$base_toolbox_command: failed to create an ID for the customized user-specific image" >&2
- fi
-
- exit 1
- fi
-
- exit 0
- ); then
- return 1
- fi
-
- # shellcheck disable=SC2031
- if [ "$toolbox_container" = "" ]; then
- toolbox_container=$(create_toolbox_container_name "$base_toolbox_image")
- if ! (
- ret_val=$?
- if [ "$ret_val" -ne 0 ] 2>&3; then
- if [ "$ret_val" -eq 100 ] 2>&3; then
- echo "$base_toolbox_command: failed to get the basename of image $base_toolbox_image" >&2
- elif [ "$ret_val" -eq 101 ] 2>&3; then
- echo "$base_toolbox_command: failed to get the tag of image $base_toolbox_image" >&2
- else
- echo "$base_toolbox_command: failed to create a name for the toolbox container" >&2
- fi
-
- exit 1
- fi
-
- exit 0
- ); then
- return 1
- fi
-
- if ! container_name_is_valid "$toolbox_container"; then
- echo "$base_toolbox_command: generated container name $toolbox_container is invalid" >&2
- echo "Container names must match '$container_name_regexp'." >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
- return 1
- fi
-
- toolbox_container_old_v1=$(create_toolbox_container_name "$toolbox_image")
- if ! (
- ret_val=$?
- if [ "$ret_val" -ne 0 ] 2>&3; then
- if [ "$ret_val" -eq 100 ] 2>&3; then
- echo "$base_toolbox_command: failed to get the basename of image $toolbox_image" >&2
- elif [ "$ret_val" -eq 101 ] 2>&3; then
- echo "$base_toolbox_command: failed to get the tag of image $toolbox_image" >&2
- else
- echo "$base_toolbox_command: failed to create a name for the toolbox container" >&2
- fi
-
- exit 1
- fi
-
- exit 0
- ); then
- return 1
- fi
-
- toolbox_container_old_v2="$toolbox_image"
- fi
-
- echo "$base_toolbox_command: container is $toolbox_container" >&3
- return 0
-}
-
-
-arguments=$(save_positional_parameters "$@")
-
-host_id=$(get_host_id)
-if [ "$host_id" = "fedora" ] 2>&3; then
- release_default=$(get_host_version_id)
-else
- release_default="30"
-fi
-toolbox_container_prefix_default="fedora-toolbox"
-toolbox_container_default="$toolbox_container_prefix_default-$release_default"
-
-while has_prefix "$1" -; do
- case $1 in
- --assumeyes | -y )
- assume_yes=true
- ;;
- -h | --help )
- if [ -f /run/.containerenv ] 2>&3; then
- if ! [ -f /run/.toolboxenv ] 2>&3; then
- echo "$base_toolbox_command: this is not a toolbox container" >&2
- exit 1
- fi
-
- # shellcheck disable=SC2119
- forward_to_host
- exit
- fi
-
- help "$2"
- exit
- ;;
- -v | --verbose )
- exec 3>&2
- verbose=true
- ;;
- * )
- exit_if_unrecognized_option "$1"
- esac
- shift
-done
-
-echo "$base_toolbox_command: running as real user ID $user_id_real" >&3
-
-if ! toolbox_command_path=$(realpath "$0" 2>&3); then
- echo "$base_toolbox_command: failed to resolve absolute path to $0" >&2
- exit 1
-fi
-
-echo "$base_toolbox_command: resolved absolute path for $0 to $toolbox_command_path" >&3
-
-if [ -f /run/.containerenv ] 2>&3; then
- if [ "$TOOLBOX_PATH" = "" ] 2>&3; then
- echo "$base_toolbox_command: TOOLBOX_PATH not set" >&2
- exit 1
- fi
-else
- if [ "$user_id_real" -ne 0 ] 2>&3; then
- echo "$base_toolbox_command: checking if /etc/subgid and /etc/subuid have entries for user $USER" >&3
-
- if ! grep "^$USER:" /etc/subgid >/dev/null 2>&3 || ! grep "^$USER:" /etc/subuid >/dev/null 2>&3; then
- echo "$base_toolbox_command: /etc/subgid and /etc/subuid don't have entries for user $USER" >&2
- echo "See the podman(1), subgid(5), subuid(5) and usermod(8) manuals for more" >&2
- echo "information." >&2
- exit 1
- fi
- fi
-
- if [ "$TOOLBOX_PATH" = "" ] 2>&3; then
- TOOLBOX_PATH="$toolbox_command_path"
- fi
-fi
-
-echo "$base_toolbox_command: TOOLBOX_PATH is $TOOLBOX_PATH" >&3
-
-if [ "$1" = "" ]; then
- echo "$base_toolbox_command: missing command" >&2
- echo >&2
- echo "These are some common commands:" >&2
- echo "create Create a new toolbox container" >&2
- echo "enter Enter an existing toolbox container" >&2
- echo "list List all existing toolbox containers and images" >&2
- echo >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
- exit 1
-fi
-
-op=$1
-shift
-
-if [ -f /run/.containerenv ] 2>&3; then
- case $op in
- create | enter | list | rm | rmi | run | help )
- if ! [ -f /run/.toolboxenv ] 2>&3; then
- echo "$base_toolbox_command: this is not a toolbox container" >&2
- exit 1
- fi
-
- # shellcheck disable=SC2119
- forward_to_host
- exit "$?"
- ;;
- init-container )
- init_container_home_link=false
- init_container_monitor_host=false
- while has_prefix "$1" -; do
- case $1 in
- -h | --help )
- # shellcheck disable=SC2119
- forward_to_host
- exit
- ;;
- --home )
- shift
- exit_if_missing_argument --home "$1"
- init_container_home="$1"
- ;;
- --home-link )
- init_container_home_link=true
- ;;
- --monitor-host )
- init_container_monitor_host=true
- ;;
- --shell )
- shift
- exit_if_missing_argument --shell "$1"
- init_container_shell="$1"
- ;;
- --uid )
- shift
- exit_if_missing_argument --uid "$1"
- init_container_uid="$1"
- ;;
- --user )
- shift
- exit_if_missing_argument --user "$1"
- init_container_user="$1"
- ;;
- * )
- exit_if_unrecognized_option "$1"
- esac
- shift
- done
- init_container \
- "$init_container_home" \
- "$init_container_home_link" \
- "$init_container_monitor_host" \
- "$init_container_shell" \
- "$init_container_uid" \
- "$init_container_user"
- exit "$?"
- ;;
- reset )
- echo "$base_toolbox_command: The 'reset' command cannot be used inside containers" >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
- exit 1
- ;;
- * )
- echo "$base_toolbox_command: unrecognized command '$op'" >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
- exit 1
- ;;
- esac
-fi
-
-if ! cgroups_version=$(get_cgroups_version); then
- exit 1
-fi
-
-echo "$base_toolbox_command: running on a cgroups v$cgroups_version host" >&3
-
-if [ "$op" != "reset" ] 2>&3; then
- if ! migrate; then
- exit 1
- fi
-fi
-
-case $op in
- create )
- while has_prefix "$1" -; do
- case $1 in
- --candidate-registry )
- registry=$registry_candidate
- ;;
- -c | --container )
- shift
- exit_if_missing_argument --container "$1"
- arg=$1
- if ! container_name_is_valid "$arg"; then
- echo "$base_toolbox_command: invalid argument for '--container'" >&2
- echo "Container names must match '$container_name_regexp'." >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
- exit 1
- fi
- toolbox_container="$arg"
- ;;
- -h | --help )
- help "$op"
- exit
- ;;
- -i | --image )
- shift
- exit_if_missing_argument --image "$1"
- base_toolbox_image=$1
- ;;
- -r | --release )
- shift
- exit_if_missing_argument --release "$1"
- arg=$(echo "$1" | sed "s/^F\|^f//" 2>&3)
- exit_if_non_positive_argument --release "$arg"
- release=$arg
- ;;
- * )
- exit_if_unrecognized_option "$1"
- esac
- shift
- done
- exit_if_extra_operand "$1"
- if ! update_container_and_image_names; then
- exit 1
- fi
- if ! create false; then
- exit 1
- fi
- exit
- ;;
- enter )
- while has_prefix "$1" -; do
- case $1 in
- -c | --container )
- shift
- exit_if_missing_argument --container "$1"
- toolbox_container=$1
- ;;
- -h | --help )
- help "$op"
- exit
- ;;
- -r | --release )
- shift
- exit_if_missing_argument --release "$1"
- arg=$(echo "$1" | sed "s/^F\|^f//" 2>&3)
- exit_if_non_positive_argument --release "$arg"
- release=$arg
- ;;
- * )
- exit_if_unrecognized_option "$1"
- esac
- shift
- done
- exit_if_extra_operand "$1"
- if ! update_container_and_image_names; then
- exit 1
- fi
- enter
- exit
- ;;
- help )
- while has_prefix "$1" -; do
- case $1 in
- -h | --help )
- help "$op"
- exit
- ;;
- * )
- exit_if_unrecognized_option "$1"
- esac
- shift
- done
- help "$1"
- exit
- ;;
- init-container )
- while has_prefix "$1" -; do
- case $1 in
- -h | --help )
- help "$op"
- exit
- esac
- shift
- done
- echo "$base_toolbox_command: The 'init-container' command can only be used inside containers" >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
- exit 1
- ;;
- list )
- ls_add_empty_line=false
- ls_images=false
- ls_containers=false
- while has_prefix "$1" -; do
- case $1 in
- -c | --containers )
- ls_containers=true
- ;;
- -h | --help )
- help "$op"
- exit
- ;;
- -i | --images )
- ls_images=true
- ;;
- * )
- exit_if_unrecognized_option "$1"
- esac
- shift
- done
- exit_if_extra_operand "$1"
-
- if ! $ls_containers && ! $ls_images; then
- ls_containers=true
- ls_images=true
- fi
-
- if $ls_images; then
- if ! images=$(list_images); then
- exit 1
- fi
- fi
-
- if $ls_containers; then
- if ! containers=$(list_containers); then
- exit 1
- fi
- fi
-
- if $ls_images && [ "$images" != "" ] 2>&3; then
- echo "$images"
- ls_add_empty_line=true
- fi
-
- if $ls_containers && [ "$containers" != "" ] 2>&3; then
- $ls_add_empty_line && echo ""
- echo "$containers"
- fi
-
- exit
- ;;
- reset )
- while has_prefix "$1" -; do
- case $1 in
- -h | --help )
- help "$op"
- exit
- ;;
- * )
- exit_if_unrecognized_option "$1"
- esac
- shift
- done
- exit_if_extra_operand "$1"
-
- reset
- exit "$?"
- ;;
- rm | rmi )
- rm_all=false
- rm_force=false
- while has_prefix "$1" -; do
- case $1 in
- -a | --all )
- rm_all=true
- ;;
- -f | --force )
- rm_force=true
- ;;
- -h | --help )
- help "$op"
- exit
- ;;
- * )
- exit_if_unrecognized_option "$1"
- esac
- shift
- done
-
- rm_ids=""
- if $rm_all; then
- exit_if_extra_operand "$1"
- else
- exit_if_missing_argument "$op" "$1"
- while [ "$1" != "" ]; do
- rm_ids="$rm_ids $1"
- shift
- done
- fi
-
- rm_ids=$(echo "$rm_ids" | sed "s/^ \+//" 2>&3)
-
- if [ "$op" = "rm" ]; then
- remove_containers "$rm_ids" "$rm_all" "$rm_force"
- else
- remove_images "$rm_ids" "$rm_all" "$rm_force"
- fi
- exit
- ;;
- run )
- while has_prefix "$1" -; do
- case $1 in
- -c | --container )
- shift
- exit_if_missing_argument --container "$1"
- toolbox_container=$1
- ;;
- -h | --help )
- help "$op"
- exit
- ;;
- -r | --release )
- shift
- exit_if_missing_argument --release "$1"
- arg=$(echo "$1" | sed "s/^F\|^f//" 2>&3)
- exit_if_non_positive_argument --release "$arg"
- release=$arg
- ;;
- * )
- exit_if_unrecognized_option "$1"
- esac
- shift
- done
- if ! update_container_and_image_names; then
- exit 1
- fi
- run false false true "$@"
- exit
- ;;
- * )
- echo "$base_toolbox_command: unrecognized command '$op'" >&2
- echo "Try '$base_toolbox_command --help' for more information." >&2
- exit 1
-esac
diff --git a/Makefile b/Makefile
index 4a0f6065a0a356134cae239fd447bf3329b56c37..2415541e5e36afa524f9c6307b8a89cd795b48b1 100644
--- a/Makefile
+++ b/Makefile
@@ -165,11 +165,6 @@ Documents/bin/rabbitmqadmin:
.bash_completion.d/toolbox:
$(download) https://raw.githubusercontent.com/containers/toolbox/0.0.16/completion/bash/toolbox
-Documents/bin/toolbox:
- mkdir -p $$(dirname $@)
- $(download) https://raw.githubusercontent.com/containers/toolbox/0.0.16/toolbox
- chmod +x $@
-
## Generated files